|
|
Senior centre in Ždár nad Sázavou
Brukner, Josef ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The aim of this master thesis is to design home for the residential care of elderly and disabled people in Žďár nad Sázavou. It is designed as a three-storey building with a basement. There are technical facilities, in the basement. Canteen, doctor´s office, manager‘s office and reception are located on the first floor. Second and third floor contains common premises and residential units.building has a prefabricated reinforced concrete structural framework with mineral wool thermal insulation. It is covered with an extensive green roof. Piles are designed as the foundation. Partition wall is designed from plasterboard. The project and 3D rendering were carried out in Revit and Lumion software. All structures comply with the valid standards and regulations. The building site contains also an outdoor car park and a park.
|
|
|
Home for the elderly
Hradilová, Kateřina ; Horová, Marcela (referee) ; Krupicová, Jana (advisor)
Content of this master´s thesis work is a project of Home for the elderly in Čejč based on requests of the investor. The object is designed as a three storey house in Porotherm system with both flat and oblique roof. There are 31 apartments located in this object. A disposal study is elaborated and a part of executive project documentation of the building is being set in this work.
|
|
|
Home for the elderly Březina
Neužilová, Markéta ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
DIPLOMA THESIS IS IS FOCUSED A PROJECT OF A NEW HOME FOR THE ELDERLY IN THE MUNICIPALITY BŘEZINA U KŘTĚTELY AT THE SURFACE NUMBER 312 / 1,310,311,309,308 / 3,308 / 2,308 / 1. CONTAINS A COMPLETE DOCUMENTATION FOR THE CONSTRUCTION. THE BUILDING IS SITUATED IN THE TERRITORY OF SOUTH MORAVIAN REGION. THE LAND IS SLIMLY SLOW AND ITS TOTAL AREA 2274 M2. THE BUILDING HAS THREE FLOOR FLOORS. THE OBJECT IS BASED ON THE FOUNDATION STRIPS AND ARE ROOFED WITH A VEGETABLE FLOOR ROOF. VERTICAL CONSTRUCTIONS ARE DESIGNED FROM A WALL CONSTRUCTION SYSTEM USING CERAMIC BRICK BLOCKES. CURRENT CONSTRUCTIONS ARE COMPLETED WITH CONTACT INSULATING SYSTEM IN ACCORDANCE WITH ETICS PRINCIPLES. CEILINGS ARE MONOLITHIC REINFORCED CONCRETE SLABS. 19 APARTMENT UNITS ARE DESIGNED IN THE BUILDING. THE CAPACITY OF THE APARTMENT UNIT IS MOSTLY SINGLE IN MOST CASES. A PRACTICAL PHYSICIAN ORDINATION AND A SERVICE AREA IS DESIGNED IN THE PART OF THE OBJECT. THIS PART IS AVAILABLE TO THE WIDE PUBLIC. DRAWING PART WAS PROCESSED IN AUTOCAD.
|
|
|
Civic amenities building
Matulíková, Monika ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of this master thesis is to design a new building of a nursing home with private garden and car park in Kroměříž. It is a two-storey building, without basement covered with a flat green roof with solar and photovoltaic panels. The building is divided in two parts. The southern part includes residential units (10 single units and 4 double units). The ground floor of the northern part includes dining room, a kitchen, staff premises and utility room and first floor includes further staff premises. Both parts are connected by a hall with stairs and an elevator. The vertical load-bearing structures are designed from sand-lime blocks. The horizontal load-bearing structures, stairway and elevator shaft are designed from cast-in-place reinforced concrete. The envelope is insulated with mineral wool. The building will be heated and cooled with a heat pump. It will also have a mechanical ventilation system with heat and cold recovery and root zone greywater treatment plant. The thesis is carried out in Autodesk Revit 2020, Autodesk AutoCAD, Lumion and DEKSOFT software. All structures comply with the valid standards and regulations.
|
|
|
Home for the elderly
Dvořáková, Jana ; Vlach, František (referee) ; Bečkovský, David (advisor)
The aim of this diploma thesis is to elaborate the project documentation of a new-built home for the elderly, in the cadastre unit of small town Blížkovice. It is a three-storey building with a basement. On the basement there are cellar berths, garage and technical facilities. On the first floor there is facilities, dining rom, a doctor´s surgery, massage, hairdresser´s and pedicure. On the second and third floor there are common areas and a total of twenty-two residentail units (1+kk – eighteen flats, 2+kk – two flats). The vertical loadbearing structures are made of clay blocks and lost formations. The object is insulated by a contact thermal insulation systém. The horizontal loadbearing structures and staircase are made of reinforced monolithic concrete slab. The roof consists of a flat roof with extensive green and terrace. There are ten parking spaces on the ground.
|
|
|
Senior center
Malcharková, Veronika ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of my diploma thesis is the design of a home for the elderly, a home with a special regime in the form of project documentation for the construction. The house is designed as stand-alone and wheelchair accessible. The building is partly basement, with four above-ground floors. On the first floor there are social and operational spaces of the home for seniors and there is also commercial use. The other above-ground floors include individual client rooms and operational background. The construction system of the whole building is a transverse wall. The building is based on concrete foundation. The external wall is made of clay block and the floor structure is made of cast-in-place reinforced slab. Basement loadbearing masonry is monolithic reinforced concrete. The staircase is a monolithic reinforced concrete and a lift is in the mirror of the staircase. The object is roofed with warm flat roof. Other part of this thesis is an assessment of building physics and fire safety requirements.
|
|
|
Home for the Seniors
Knapčíková, Šárka ; Bartolšicová, Eva (referee) ; Matějka, Libor (advisor)
The aim of diploma thesis is elaborate the project documentation to execution of a new building home for the elderly. The building is detached and situated in a sloping terrain on the selected piece of land in the cadastral area of Smíchov in Prague 5. This new building is designated for permanent housing for persons of retirement age with a good level of their ability to perform routine daily tasks and take care of themselves, but also for people without this ability. Home for the Elderly offers a 40 beds in single and double rooms. The building has three above grounds and one underground floor. The entire building is expected movement of persons with reduced mobility. Entry to the first functional part is located on the north side of the home. It consists of a reception room and each floors with rooms. In the home for the elderly is 30 rooms with private bathroom. The second function of the operation home is located in the basement floor, entrance is possible from the south or staircase or elevator from the first floor. All floors are connected by two staircases, and three elevators. The object is designed in a technology of Porotherm system. Roof structure consists of single-layer flat roof with a classic sequence of layers, combined DUO and extensive green. The project documentation which is needed for a realization of a new home for the elderly is worked up with eight structural details including in a computer program AutoCAD.
|
|
|
Home for the elderly
Hanisch, Tomáš ; Sibilla, Luboš (referee) ; Matějka, Libor (advisor)
The subject of my diploma thesis is the design of a new home for the elderly and the elaboration of the implementation project documentation. The intention is to build a house for the permanent housing of older persons, with the possibility of using care services. The building consists of 16 residential dwellings and 6 housing units with nursing services. Maximum occupancy is 32 guests. The home for the elderly also offers facilities for boarding, medical service, hairdressing and rehabilitation. The object is designed for barrier-free use. The object is set in a flat terrain on the selected land. The building has 4 above-ground floors and one underground. The building is designed as a brick made of lime sand blocks. The vertical perimeter structures are provided with a contact insulation system. The horizontal bearing structures are designed as monolithic reinforced concrete slabs. The roof structure of the building consists of a mansard roof structure. The drawing documentation was processed in a computer program AutoCAD.
|
|
|
Senior house
Sviták, Tomáš ; Řezníček, Petr (referee) ; Hradil, Dušan (advisor)
The subject of this thesis is a design documentation for new construction of the elderly house in Austerlitz. The building has one underground and two or three floors. Designed capacity is 40 clients in the house. In addition to the accommodation of seniors also provides catering facility, motivational activities and other services connected with the activities of the senior home under the Act on Social Services. From a structural point of view it is an object of a wall brick supporting system, ceiling structures are made of panels of prestressed concrete. Roofs are designed flat single shell.
|
|
|
Home for the Elderly
Ondráček, Martin ; Třeštíková, Ing Jana (referee) ; Berková, Petra (advisor)
Content of this master thesis is a design of a bulding of a home for the elderly in Únětice. The building is designed as a four storey, made of brick masonry with contact thermal insulation system and a hipped roof made of wooden girder trusses. There are 24 flats situated in this building.
|
guest ::
